Breda LRV - Flexible gangway connections

Work continues on my Breda LRV project ...

So the correct term for the wiggly bit between carriages is "gangway connection". I'm not sure though if that applies on trams since there is no gangway? Anyway, I needed something to bridge the gap between the two halves, as this is obviously not the look I'm after:

Please forgive the cruel close up photography!

I've been pondering this for some months now, knowing that sooner or later I would have to tackle it. Luckily I came across a technique involving carefully folded paper in a magazine a while back and so didn't have to invent something myself.

Making folded carriage gangway connectors First prepare some paper. I took a sheet of printer pa...

Breda LRV - Flywheel

Work continues on my Breda LRV project ...

No train is complete without a motor, and so it is time to motorise my LRV. I've used a chopped up Kato B-train shorty chassis for the power bogie on this train, but the motor it came with wasn't amazing. No flywheel, and pretty high speed. So a quick rummage through my motor bin netted a very long and skinny motor, 6mm high and 8mm wide, and about 20mm long. But it still lacked a flywheel...

Which brings me to my other new toy, a lathe! Xmas was pretty good to me this year, with a very large box under the tree waiting for me. All this came about after I had a brainwave to sell a few unused models and tools, and after a few lucky (for me!) bidding wars on my auctions, I soon had more than enough for a brand new lathe.

Breda LRV - Laser-cut window masks

Work continues on my Breda LRV project after many many months of silence...

After a rather long break from Utrainia I am back and building things again. Perhaps I should explain the gap... first we rebuilt our bathroom, then as Christmas approached I built a garden railway, then I discovered we had a free laser cutter in town, and then I caught the bug and built my own laser cutter.

It's a little rough & ready and needs some fine tuning, however the important thing is, my 2.5W laser cutter is surprisingly useful. I am easily able to cut out cardboard up to 1mm think, and my offcuts of 1.3mm picture framing mat board cut beautifully. I can cut out thin balsa and basswood up to 1.6mm thick, as well as pap...

Railways in Europe - Part 3: France

My journey through Europe continues, this time in France...

We arrived very early in the morning on the Thellõ, as in 6am early. Europe is pretty chilly at that time of the morning, but Dijon was fairly alive. We had a few hours to kill so I went exploring.

My first introduction to the SNCF, there was lots to see. There were articulated electric units like the above, articulated diesel multiple units like below, articulated TGVs, and loco hauled trains.

Ranuska gets a beach!

After months of inactivity on Ranuska, I decided to take a break from bathroom renovations and dedicate a bit of time on a rainy weekend afternoon to finishing off Ranuska. The single largest gap in Ranuska? No sea!

So wasting no time I got stuck in. I dug out my black paint and gave all the deep water areas a good coat of black, with just the tiniest hint of dark blue mixed through. Around the beach I painted the same sand colour (Resene Sandcastle) down onto the ocean area, then feathered it into light blue. Looking at photos from tropical paradises, the water is so clear that the transition from beach to sea barely even changes colour.

Around the rocks I mixed up a thin wash of brown (Resene Sambuka) and muddied up the black around the rocks, then washed the bottom inch of so of the rocks with the brown. Later I did the lower half inch or so of the rocks with a dilute black wash. Being plaster the rocks just suck up the colour and look wonderfully worn and...

Masterton Model Railway show

This weekend was the biennial model railway show here in town, an eagerly awaited event by yours truly. As master of timekeeping I made sure we were down there right at opening time, lest the trade stands have some bargains that I missed out on!

First up, the trade stands. There were only 3 and a half stands there, and only a handful of N gauge stuff. I snapped up a few second hand British N scale wagons for $9 each. My first British N scale items in a long time, they seem well made and will look right at home in Utrainia. I was a little disappointed there weren't more trade stands, however I guess it is a pretty small show.

On to the railways.

No new layouts that I hadn't already seen, however it was nice to revisit some familiars with a closer eye. "Hexeter" presented a rather interesting scene, with a hexagonally shaped railway of 6 modules forming a circular snapshot of early British railway history. Segments of the scenery was good, but it is the locos that...