workbench update

Platform progress

Progress continues at a good pace on my fiddle yard module.

I made up the outside platforms, managing to make twice as much cardboard siding as needed, which is just as well as I fluffed the measurements and glued up one entire platform all wrong! Lucky I had a spare set of sides.

Here they are glued up, ready for painting.

I gave them a good brush with my Half Cougar test pot, then gave everything a good rolling with a foam roller which removes the brush strokes and gives a nice fine texture to the surface.

Once dry I g...

Fiddle yard wired up

A few more ticks on the list this weekend with the tracks all wired up now.

Power comes in through the RJ45 connector at the bottom, through the flexible black cable to the two copper strips. The solid coloured wires are wired to the common track, while the striped wires go through the micro switches to the other track.

Testing with a multimeter showed that the wiring in the above photo was wrong; that has since been corrected. Haven't done a live test yet.

Also cut out the wood and cardboard for the two smaller outside tracks, though I mis-calculated on the cardboard and ended up making twice as many platform edges as I needed.

A fiddle yard

Oh dear, 5 weeks without an update! Yup Utrainia has been floundering a little bit with very little to show for February. I'm not entirely sure where the time went, but I think I have been suffering from too many choices, not enough direction.

To fix that, I've made an online todo list in my favourite job tracker, Trello. Each project has its own card with a checklist of little baby steps. Even something as small as cutting out some cardboard has an entry. Now whenever I sit down for some train time, I have direction and focus, and everything I do can be towards my current project.

And so far it is showing good results. Witness: the fiddle yard!

A fiddle yard is a very British thing, being used to keep several trains on the layout, but not actually occupying valuable siding or station space. I decided I needed one so that I can have a selection of trains available to run on my mini modules, without having to lift trains off and back on the rails every time I wan...

Happy new year

Happy new year! December was a wash with nothing being achieved before we flew down to Christchurch for xmas. I did however get a little bit of modelling in while I was away, having a bit of fun with the Jörgen Edgar technique for making N scale locomotives quickly. And come Christmas day, I was pretty spoilt with models, kitsets, people, tools, and even books. So no complaints here!

Ranuska scenery

Ranuska is coming along well. I have made an executive decision not to use the "tall skinny house", it just didn't seem to fit with everything else. It will be used elsewhere I am sure though. Instead I have turned the area into a small overgrown park.

Just need to add a picnic table or two and maybe some raco...

Ranuska scenery

With the sanatorium complete, attention is moving to the quaint seaside settlement of Ranuska...

It's no secret that I love doing scenery, and I've been making good progress this week. Here is a before shot from last Saturday:

First of all I had to build up the contours a bit to make the landscape a bit more believable. A block of polystyrene was soon sculpted into a crude shape.

Three buildings, each on its own level.

One of the things I've struggled with in the past is attaching my buildings to the scenery....

A home for the sanatorium

The saga of the Sanatorium continues...

It's funny, but after months of stop-start progress getting the sanatorium completed, I am not on fire and have achieved more in a few days than I have in months!

First up were some holes for the lift towers. Luckily I had a hole cutter that was just a few mm bigger than I needed. It made short work of the plaster shell / polystyrene core scenery. Then I was able to gingerly lower it into position and admire the result:

Wow!

The holes were miles too deep, so I made up packers to raise them back to the right height. Once the spirit level was happy I wrapped the tubes in masking tape and made up some sculptamold to fill in the around them.